Epitropic Fibres Ltd

Shanghai office contacts 上海办事处

Brian McAndrew
MB: +86 1391 7700 124

Fax +86 (0) 21 5272 0045
Xiao Ling ( 肖玲 )
XL82108210@hotmail.com
click to print hard copy
Set your printer to 'portrait' and click to print this sheet

click to close and return : : CLOSE : : PRODUCT DATA SHEET 产品性能表  

ELECTRICAL PROPERTIES
电学性能
Electrical resistance of Epitropic fibre is 10 – 100 Megohms/cm.
导电纤维电阻:106-108 Ω/cm
Approximately 1% Epitropic fibre prevents discomfort from static in everyday clothing and carpets.
在每件衣物或地毯中大约1%的导电纤维能够消除由静电引起的不适。
2% – 5% Epitropic fibre is necessary in fabrics for industrial filters and safety workwear.
在工业过滤和安全工作服装织物中导电纤维的含量必须达到2%-5%。
Resistivity is approximately 1 – 100 Megohms/sqm but is dependent on the fabric and its construction.
电阻率约为105- 107Ω/m2,具体数值根据织物及其结构而定。

RESISTANCE OF EPITROPIC FIBRE TO CHEMICAL AGENTS
导电纤维对于各种化学和物理制剂的抵抗性能。
Acids
Except under the most extreme conditions the rate of acid hydrolysis is very slow and good resistance to the majority of mineral and organic acids can be expected.
除非在极端的情况下,酸水解率是非常缓慢的,而且对于大多数的无机酸具有良好的抗酸性。
Alkalis
Aqueous alkalis except ammonia and its derivatives cause progressive solution of the fibre. Ammonia, quaternary bases, Amines etc degrade the fibre without dissolving it. Maximum level recommended is pH 10.
除了氨水及其衍生物,其他碱溶液导致纤维的逐步溶解,1/4的氨水或胺不经过溶解而直 接降
解纤维。建议最高的PH值为10
Oxidising Agents
氧化剂
Epitropic fibre has excellent resistance to oxidising agents and withstands bleaching processes.
导电纤维具有卓越的抗氧化性能,并且能承受漂白处理。
Reducing Agents
还原剂

Epitropic fibre has excellent resistance to reducing agents.
导电纤维具有卓越的抗还原剂性能。

Water / Steam
/蒸汽
Good
良好
Long term exposure
to dry heat
长时间暴露在干热环境中
Excellent
优异

PHYSICAL PROPERTIES
物理性能
Property 性能参数 Shrinkage properties 收缩性能
Effect of temperature 温度影响
Decitex 3.3 Hot air 150¢XC 热空气
1.0% Continuous operation temperature
持续工作温度
Length 长度 75mm/51mm/38mm Boiling water 沸水
1.5%
Dry: 100¢XC
Wet 湿 80¢XC
Colour 颜色 Black 黑色 Autoclave 140¢XC 高压锅 0.5% Maximum (short term)
end use
最高(短时间)
终端使用温度
145¢XC
Cross section 横截面 Circular 圆形    
Tenacity 断裂强度 35 cN/tex     Operating temperature 工作温度
Extension 拉伸率 40%     Melting point - sheath
熔点 (外壳)
220¢XC
Crimp 压缩 Flat 平层 Effect of moisture 湿度影响 Melting point - core
熔点 (内核)
255¢XC
Density 密度
1.42g/cm 3
Moisture regain 回潮 0.3 % Flash point 闪点 485¢XC

Disclaimer
This sheet contains general data only. For full details and more information please contact sales@epitropic.com

  埃匹克导电纤维有限公司是JWH集团的成员之一 click to visit JWH GROUP website

click to visit Newton-Smith Associates website

  Revision date: 10.10.03
All Rights Reserved 2006 Newton-Smith Associates Ltd